B0E0Z

Description and Technical Features

Designed to control access to the dangerous or protected areas, this device can be installed on any kind of door, gate, housing, 

and permits remote unlocking from distance.   

It can be equipped with a forced opening contact to allow detection when access is closed again.   

Locking/Unlocking: through voltage application;

Stroke: 14.5+-2.5mm.

Supply Voltage: 24/48/110V, 135, 220 AC, DC. We can provide other voltages on request;

Running Coefficient: 100%;

Consumption: 14,5W;

Options:  by-pass key, unlocking through voltage application (SP), feedback switch, Push button (power save)

This lock can work at 24, 48, 110, 135 or 220VDC.  When solenoid is not energized, the bolt is OUT. We can provide other voltages on request. 

Once the solenoid is energized, the bolt goes IN. In the drawing it is shown the standard bolt length (solenoid not energized = initial position). We can personalize the bolt length

STANDARD BOLT TRAVEL = 14.5 +-2.5mm

This lock can work at 220V AC. When solenoid is not energized, the bolt is OUT.

Once the solenoid is energized, the bolt goes IN. 

In the drawing it is shown the standard bolt length (solenoid not energized = initial position). We can 

personalize the bolt length

STANDARD BOLT TRAVEL = 14.5 +-2.5mm