Solenoid Controlled Boltlock
Annulation key - DC
This lock can work at 24, 48, 110 or 220VDC. When solenoid is not energized, the bolt is OUT.
Once the solenoid is energized, the bolt go IN.
In the drawing it is shown the standard bolt length (solenoid not energized = initial position). We can
personalize the bolt length
STANDARD BOLT TRAVEL = 14.5 +-2.5mm
We can provide other voltages on request.
Nominal voltage (standard values): Vcc 12, 24, 110, 125, 135, 220
Absortion of the coil at 20°C Amp 0.8 (12Vcc), 0.6 (24Vcc)
Power of the coil at 20°C Watt 9.6 (12Vcc), 14.5 (24Vcc)
Temperature of coil at work 80 to 90°C (environment at 20°C)
DUTY factor 100%
Travel of the core 12mm
Force at starting position 5N
Pre-charge at starting position 0.8N
Charge force at end travel 2N
IP Protection of the solenoid IP30
Isolation of coil Class H-200°C
All unspecificed measures are done in ambient 20°C
All measures are nominal
Please contact us for special functions or special coils