Our products

Our products

There are 32 products.

Showing 1-12 of 32 item(s)

Main products available

  • Categories: Electromechanical locks
  • Categories: Multiple bolt locks
  • Categories: Normal duty keys
  • Categories: Rail interlocks
  • Categories: Valve locks

BKF2Z

<p>Description</p> <p>Bolt interlock with 2 key entries</p> <p>One cylinder bolt lock with a bolt <img src="https://www.kls-locks.com/img/cms/simbolo-del-diametro.jpg" alt="" width="15" height="16" />15mm</p> <p> Bolt travel = 20mm</p> <p>Please refer to ordering information for various options of bolt IN dimensions</p> <p>Bolt is in until both keys are trapped - Function H (standard)</p> <p>Bolt is operated by trapping one key and at same</p> <p>time the other key is freed - function J (standard)</p> <p>Body : full body Brass, red polyester finish</p> <p>Torque : 17 N/m</p> <p>Weight: 900 g.</p>

BSM2Z

<p><strong>Description and Technical Features</strong></p> <p>Bolt lock with 1 lockbolt and 2 keys.</p> <p><strong>BSM2Z-A:</strong></p> <p> Lockbolt out : L=18mm. Key 1 released. Key 2 captive.</p> <p> Lockbolt in : l=6mm. Key 1 captive. Key 2 released.</p> <p><strong>BSM2Z-C:</strong></p> <p> Lockbolt out : L=18mm. Keys 1 and 2 released.</p> <p> Insert key 2, turn 180°.</p> <p> Insert key 1, turn 180°.</p> <p> Lockbolt in : l=6mm. Keys 1 and 2 captive.</p> <p><strong>Possibilities:</strong></p> <p> - Lockbolt on the left; </p> <p> - Other options as per selector on next pages.</p> <p><strong>Options:</strong></p> <p> - Lockbolt with 15mm. diameter;</p> <p> - Lockbolt out : L=35mm.</p> <p><strong>Weight:</strong> 450g.</p> <p></p>

BKF1N

<p>When the application is in a harsh environment (outdoor, railways, etc.)  we can provide a heavy duty switch </p> <p><strong>Electrical Characteristics:</strong></p> <p>We use positive opening features on our switches.</p> <p> - block of contacts 2NC+1NO</p> <p> (contact NC with forced opening);</p> <p> - rating 3A 250VAC - IP66-67</p> <p></p>

BKF1M

<p><b>Description and Technical Features</b></p> <p>The key operated bolt interlock is fitted with an electrical con-</p> <p>tact suitable for the control of electrical switchgear, valves or </p> <p>other devices.</p> <p>The electrical contacts are used to provide feedback about the </p> <p>bolt position or to switch the control circuitry of a machine.</p> <p><b>Material: </b></p> <p> - Cylinder and lock body: Full Brass;</p> <p> - switch cover : stainless steel;</p> <p></p> <p><b>Weight: </b>900g.</p> <p><strong></strong></p> <p><strong>Electrical Characteristics:</strong></p> <p>We use positive opening features on our switches.</p> <p> - contacts 2NC+1NO</p> <p> (contact NC are with forced opening);</p> <p>Type of switch: Microswitch SNAP ACTION</p> <p>Switches features: with lever</p> <p>Contacts configuration: SPDT</p> <p>AC contacts rating @R: 5A/250VAC, </p> <p>DC contacts rating @R: 5A/30VDC</p> <p>Switching method: ON-(ON)</p> <p>IP rating: IP40</p> <p>The key operated bolt interlock is fitted with an electrical con-</p> <p>tact suitable for the control of electrical switchgear, valves or </p> <p>other devices.</p> <p>The electrical contacts are used to provide feedback about the </p> <p>bolt position or to switch the control circuitry of a machine.</p> <p><strong>Material:</strong> </p> <p> - Cylinder and lock body: Full Brass;</p> <p> - switch cover : stainless steel;</p> <p>Weight: 900g.</p> <p></p>

BKF1V

<p><strong>Description and Technical Features </strong></p> <p>Mechanical or electromechanical blackage of power circuits in the open position.</p> <p>It has a one blocking or interlocking latch that can release from 1 t o3 keys.</p> <p><img src="https://www.kls-locks.com/img/cms/electikal-parameters.png" alt="electrical parameters" class="img-responsive" /></p> <p></p>

CHM1P

<p><strong>Description and Technical Features </strong></p> <p>The CHM1P is a key driven electrical switch suitable for the isolation of switching of low current (10A). </p> <p>Standard block are 2 poles, 1O1C, 415V, 10A.</p> <p>Contact us for any other version.</p> <p>All contacts are UL and CE approved.</p> <p><strong>Features:</strong></p> <p> -Panel mounting:         0.8 – 10mm thickness;</p> <p> -Mounting:                  by screws;</p> <p> -Barrel:                      nickel-plated brass;</p> <p> -Electrical contacts:     400Vac, 6A max</p> <p>                                  2O (contact open)</p> <p>                                  or 2C (contact closed).</p> <p><strong>Options:</strong></p> <p> - 3O, 1C contacts.</p>

B0E0Z

<p><strong>Description and Technical Features</strong></p> <p>Designed to control access to the dangerous or protected areas, this device can be installed on any kind of door, gate, housing, </p> <p>and permits remote unlocking from distance.   </p> <p>It can be equipped with a forced opening contact to allow detection when access is closed again.   </p> <p>Locking/Unlocking: through voltage application;</p> <p>Stroke: 14.5+-2.5mm.</p> <p>Supply Voltage: 24/48/110V, 135, 220 AC, DC. We can provide other voltages on request;</p> <p>Running Coefficient: 100%;</p> <p>Consumption: 14,5W;</p> <p>Options:  by-pass key, unlocking through voltage application (SP), feedback switch, Push button (power save)</p> <p><img src="https://www.kls-locks.com/img/cms/BOEOZ-DC.png" alt="BOEOZ-DC" class="img-responsive" /></p> <p><strong>This lock can work at 24, 48, 110, 135 or 220VDC.  When solenoid is not energized, the bolt is OUT.</strong> We can provide other voltages on request. </p> <p>Once the solenoid is energized, the bolt goes IN. In the drawing it is shown the standard bolt length (solenoid not energized = initial position). We can personalize the bolt length</p> <p>STANDARD BOLT TRAVEL = 14.5 +-2.5mm</p> <p></p> <p><img src="https://www.kls-locks.com/img/cms/BOEOZ-AC.png" alt="BOEOZ-AC" class="img-responsive" /></p> <p><strong>This lock can work at 220V AC. When solenoid is not energized, the bolt is OUT.</strong></p> <p>Once the solenoid is energized, the bolt goes IN. </p> <p>In the drawing it is shown the standard bolt length (solenoid not energized = initial position). We can </p> <p>personalize the bolt length</p> <p>STANDARD BOLT TRAVEL = 14.5 +-2.5mm</p> <p></p> <p></p>

CKE1P

<p><strong>Description and Technical Features</strong></p> <p>Key locked by a solenoid – key is free when the solenoid is energized. Switch is activated when the key is made free.</p> <p>Switch features:</p> <p> - Voltages available for the solenoid as per selctor;</p> <p> - Duty factor 100%;</p> <p>Protection index IP40.</p> <p><strong>Options:</strong></p> <p> - Second cylinder;</p> <p> - Engraving on cylinder and/or on lock case.</p> <p><strong>Weight</strong>: 1500g.</p> <p></p>

BKE1M

<p>BKE1M is the version with bolt movement controlled by key and solenoid. </p> <p></p>

CKE2P

<p><strong>Description and Technical Features</strong></p> <p>Key locked by a solenoid – key is free when the solenoid is energised. Switch is activated when the key is made free.</p> <p>Switch features:</p> <p> - Voltages available for the solenoid 24 DC;</p> <p> - Other voltages on demand.</p> <p>Protection index IP40.</p> <p><strong>Options:</strong></p> <p> - Second cylinder;</p> <p> - Engraving on cylinder and/or on lock case.</p> <p><strong>Weight:</strong> 1500g.</p>

ARMZ-KAB1

<p><strong>Description and Technical Features</strong></p> <p>This cylinder is for railway applications as well as power industry panels</p> <p> - Full metal cylinder, no plastic parts;</p> <p> - 360, 180, 90° clockwise or anti-clockwise rotation.</p> <p><strong>Weight:</strong> 100g.</p> <p></p>

B0E0Z-37RA01

<p><b>This lock can work at 24, 48, 110 or 220VDC.  When solenoid is not energized, the bolt is </b><b>OUT.</b></p> <p>Once the solenoid is energized, the bolt go IN. </p> <p>In the drawing it is shown the standard bolt length (solenoid not energized = initial position). We can </p> <p>personalize the bolt length</p> <p>STANDARD BOLT TRAVEL = 14.5 +-2.5mm</p> <p>We can provide other voltages on request.</p> <h2>SOLENOID</h2> <p>Nominal voltage (standard values): Vcc 12, 24, 110, 125, 135, 220 </p> <p>                                                    Vac 220</p> <p>Absortion of the coil at 20°C  Amp 0.8 (12Vcc), 0.6 (24Vcc)</p> <p>Power of the coil at 20°C  Watt 9.6 (12Vcc), 14.5 (24Vcc)</p> <p>Temperature of coil at work  80 to 90°C (environment at 20°C)</p> <p>DUTY factor     100%</p> <p>Travel of the core    12mm</p> <p>Force at starting position  5N</p> <p>Pre-charge at starting position 0.8N</p> <p>Charge force at end travel  2N</p> <p>IP Protection of the solenoid  IP30</p> <p>Isolation of coil    Class H-200°C</p> <p>All unspecificed measures are done in ambient 20°C</p> <p>All measures are nominal</p> <p>Please contact us for special functions or special coils</p> <p></p>